Output values: 0-60 V, 0-20 A, 420 W
PowerFlex design gives variable voltage and current combinations within a maximum power range
PowerFlex or fixed-range operation plus custom limits
Constant voltage or constant current operation
Outputs can be wired in series or parallel for 120 V or 40 A
Variable OVP trips
True analogue controls
Voltage Setting: By coarse and fine controls
Current Setting: By single logarithmic control
Settings locking
Independent digital voltage and current meters for each output with 4 digit resolution
Voltage meter: Resolution: 10 mV
• Accuracy: 0.1 % of reading ± 2 digits
Current Meter: Resolution: 10 mA
• Accuracy: 0.3 % of reading ± 20 mA
Ripple & noise: Typically < 3 mV rms (CV mode)
Switchable local or remote sensing
LED indication of Output On, V/I Limits, CV, CI, Power Limit
Silent fan-free cooling
DC output on/off switch
All outputs are intrinsically short circuit proof
Output terminals can accept fixed shroud 4 mm plugs, standard 4 mm plugs, fork terminals and bare wires
Dimensions: ½ module, 125(W) x 200(H) mm
Options:
TTICAL Calibration certificate with results
DCAETHERNET Ethernet connection and control program (DCACPX400SP only)
Teklab Oy
Address: Länsikaari 6A, 07900 Loviisa
Tel: +358-19-536 000
E-mail: info@teklab.fi